osmo.png?1718095600

Coatings for furniture, walls and ceilings

Tip
OSMO Hardwax-Oil Original
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Content: 0.375 liter (€79.84* / 1 liter)

From €29.94*
OSMO Concrete Oil 610 Clear
Makes concrete surfaces and unglazed tiles more satin-resistantOsmo Concrete oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.ADVANTAGES> Unique oil-wax combination> Microporous surface> Protection against dirt and wear> Highly water repellent> Resistant to wine, cola, beer (acc. DIN 68861-1A)> Sizes: 0.75 l; 2.5 l> 1 litre covers approx. 50 m2 with one coat. Product coverage varies greatly depending on the absorption rates of the substrate and this can lead to discrepancies in coverage. PROCESSINGFinished surface in 2 days, 2 coatsWith Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well.Remove excess with a pad or lint-free clothDrying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)Drying time approx. 8-10 hours

Content: 0.75 liter (€43.92* / 1 liter)

From €32.94*
Tip
TOPOIL SURFACE KIT
One set for all eventualities – fully equipped for the treatment of worktops and furniture made of wood.Initial care, maintenance and refreshing in one set: TopOil clear matt 500 ml Spray Cleaner 500 ml Hand Pad Holder Oil Finish Applicator Fleece Buffing fleece Care instructions

€54.96*
Tip
OSMO TopOil 0.5l
Oil-wax coating – created specifically for use on wooden furniture and (kitchen) work surfaces!  Clear or transparent, satin or matt, for the interiorHighly recommend for furniture and (kitchen) work surfaces made of woodTopOil makes the wooden surface resistant to common household chemicals and stains and abrasion and repels water. It is saliva-resistant and sweatproof, food-safe as well as suitable for children's toys.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no need for sanding!Can sizes: 0.5 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.5 liter (€59.88* / 1 liter)

From €29.94*
OSMO Polyx-Oil Care and Repair Paste 3080 75 g
Ideal for the maintenance and repair of surfaces treated with Hardwax Oil!OSMO Polyx-Oil Care and Repair Paste is ideal for the simple repair of small damages in all wood surfaces treated with Hartwachs-Öl, such as furniture surfaces and worktops made of solid wood or laminated wood (e.g. kitchen worktops, tabletops, shelving etc.) in indoor areas. Also suitable for all wooden flooring, such as solid, plank, strip, OSB and cork flooring as well as stairs.ADVANTAGES Spot repairs possible Very tough and hard-wearing Suitable for wood and microporous Resistant to saliva and perspiration, suitable for children's toys Resistant to coffee, wine and cola Sizes: 75 g tube 75 g covers 2-3 m2 with one application on raw wood

€18.96*
OSMO Wood Wax Finish Intensive Colours
Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.375 l; 0.75 l; 2.50 l (Intensive colours are not available in all sizes.)* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.125 liter (€172.80* / 1 liter)

From €21.60*
OSMO Wood Wax Finish Transparent
Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.75 l; 2.50 l* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.75 liter (€53.20* / 1 liter)

From €39.90*
OSMO INTERIOR-WAX
Innovative Osmo finishing system – ideal for coating or renovating interior wood panelling! Transparent or opaque, satin, for the interiorHighly recommended for furniture and children's toys, walls, ceilings, doors, beams and edge-glued panelsInterior Wax is resistant to dirt, water and abrasion, and smoothens the surface.Fast drying – 2 coats in one dayNumber of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.75 liter (€47.92* / 1 liter)

From €35.94*
OSMO WOOD WAX FINISH CLEAR EXTRA THIN 1101
Geared towards needs of extractive-rich hardwood species – for a low-maintenance surface!Clear, satin, for interior useHighly recommended for extractive-rich woods, such as Merbau, Wenge, Jatoba etc.Particularly deep-penetrating, retains the natural character of the wood. The surface is fully protected, becomes water-repellent and stays breathable.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 l1 litre covers approx. 24 m2 with 1 coat.

Content: 0.75 liter (€42.64* / 1 liter)

From €31.98*
OSMO WOOD PROTECTOR 4006 Clear
Nonbiocidal wax impregnation - perfect for use in wet rooms!Clear, for interior and exterior useHighly recommended for use in wet rooms, such as bathrooms and kitchens, as well as outdoor sandboxes and playground equipmentExtremely water-repellent, contains no organic biocidesNumber of coats: 1 coat is sufficient, a top coat with a product from the Osmo range must be carried out within 1 week of application.Can sizes: 0.75 l; 2.50 l1 litre covers approx. 8.4 m² with 1 coat.

Content: 0.75 liter (€42.64* / 1 liter)

From €31.98*
OSMO UVIWAX UV-Protection
Unique UV protection - ideal for the initial treatment of solid wood wall and ceiling panelling! Clear or transparent, satin, for the interiorHighly recommended as a self-priming finish for wall and ceiling panelling, as well as cabinets and doorsUviwax® UV-Protection significantly reduces the natural yellowing process, and the bright, natural colour of the wood is preserved for a long time.Number of coats: 2 coats on the raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.75 liter (€53.28* / 1 liter)

From €39.96*