OSMO Wood Wax Finish Transparent

The tried and trusted Polyx®-Oil in a coloured version – tinted for individual creativity! Transparent, satin, for the interiorHighly recommended for solid wood, plankwood, OSB and cork flooring and blockstrip as well as furniture and edge-glued panelsPolyx®-Oil Tints creates a transparent coloured wood surface.Number of coats: for untreated wood max. 2 coats. For floors, max. one coat with Polyx®-Oil Tints and carry out a second coat with a clear Osmo Polyx®-Oil.With Hard Wax Oil Colored 3040 White, also use Hard Wax Oil Colored 3040 White as a second coat to prevent yellowing.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Geared towards needs of extractive-rich hardwood species – for a low-maintenance surface!Clear, satin, for interior useHighly recommended for extractive-rich woods, such as Merbau, Wenge, Jatoba etc.Particularly deep-penetrating, retains the natural character of the wood. The surface is fully protected, becomes water-repellent and stays breathable.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 l1 litre covers approx. 24 m2 with 1 coat.

Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.375 l; 0.75 l; 2.50 l (Intensive colours are not available in all sizes.)* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.

Unique UV protection - ideal for the initial treatment of solid wood wall and ceiling panelling! Clear or transparent, satin, for the interiorHighly recommended as a self-priming finish for wall and ceiling panelling, as well as cabinets and doorsUviwax® UV-Protection significantly reduces the natural yellowing process, and the bright, natural colour of the wood is preserved for a long time.Number of coats: 2 coats on the raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Cleans brushes, quickly and easily.For cleaning of painting utensils after applying Osmo Wood Finishes or other solvent-based oil or acrylic paints.Can also be used as thinner for solvent based paints.

Perfect application the easy way! Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods.Available in the following widths: 220 and 400 mm.

The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.

Optimally equipped for any painting projectFor the optimal application of all oil based wood finishes    •    Ideal for treating larger areas made of rough sawn, untreated or planed wood.    •    Ergonomically shaped for fatigue-free work    •    Optimal product absorption and and even distribution provide very good finishing results.    •    Contents: roller tray with ridged area, disposable tray inserts (3 pieces), Microfibre Roller (100 mm wide) and roller frame and Flat Brush (60 mm)    •    Suitable for Osmo System Telescopic Handle

The tried and trusted Polyx®-Oil in a coloured version – tinted for individual creativity! Transparent, satin, for the interiorHighly recommended for solid wood, plankwood, OSB and cork flooring and blockstrip as well as furniture and edge-glued panelsPolyx®-Oil Tints creates a transparent coloured wood surface.Number of coats: for untreated wood max. 2 coats. For floors, max. one coat with Polyx®-Oil Tints and carry out a second coat with a clear Osmo Polyx®-Oil.With Hard Wax Oil Colored 3040 White, also use Hard Wax Oil Colored 3040 White as a second coat to prevent yellowing.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Geared towards needs of extractive-rich hardwood species – for a low-maintenance surface!Clear, satin, for interior useHighly recommended for extractive-rich woods, such as Merbau, Wenge, Jatoba etc.Particularly deep-penetrating, retains the natural character of the wood. The surface is fully protected, becomes water-repellent and stays breathable.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 l1 litre covers approx. 24 m2 with 1 coat.

Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.375 l; 0.75 l; 2.50 l (Intensive colours are not available in all sizes.)* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.

Unique UV protection - ideal for the initial treatment of solid wood wall and ceiling panelling! Clear or transparent, satin, for the interiorHighly recommended as a self-priming finish for wall and ceiling panelling, as well as cabinets and doorsUviwax® UV-Protection significantly reduces the natural yellowing process, and the bright, natural colour of the wood is preserved for a long time.Number of coats: 2 coats on the raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.