EASY MAINTENANCE WITH OSMO HARDWAX-OIL

Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Makes concrete surfaces and unglazed tiles more satin-resistantOsmo Concrete oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.ADVANTAGES> Unique oil-wax combination> Microporous surface> Protection against dirt and wear> Highly water repellent> Resistant to wine, cola, beer (acc. DIN 68861-1A)> Sizes: 0.75 l; 2.5 l> 1 litre covers approx. 50 m2 with one coat. Product coverage varies greatly depending on the absorption rates of the substrate and this can lead to discrepancies in coverage. PROCESSINGFinished surface in 2 days, 2 coatsWith Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well.Remove excess with a pad or lint-free clothDrying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)Drying time approx. 8-10 hours

Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Ideal for the maintenance and repair of surfaces treated with Hardwax Oil!OSMO Polyx-Oil Care and Repair Paste is ideal for the simple repair of small damages in all wood surfaces treated with Hartwachs-Öl, such as furniture surfaces and worktops made of solid wood or laminated wood (e.g. kitchen worktops, tabletops, shelving etc.) in indoor areas. Also suitable for all wooden flooring, such as solid, plank, strip, OSB and cork flooring as well as stairs.ADVANTAGES Spot repairs possible Very tough and hard-wearing Suitable for wood and microporous Resistant to saliva and perspiration, suitable for children's toys Resistant to coffee, wine and cola Sizes: 75 g tube 75 g covers 2-3 m2 with one application on raw wood

The tried and trusted Polyx®-Oil in a coloured version – tinted for individual creativity! Transparent, satin, for the interiorHighly recommended for solid wood, plankwood, OSB and cork flooring and blockstrip as well as furniture and edge-glued panelsPolyx®-Oil Tints creates a transparent coloured wood surface.Number of coats: for untreated wood max. 2 coats. For floors, max. one coat with Polyx®-Oil Tints and carry out a second coat with a clear Osmo Polyx®-Oil.With Hard Wax Oil Colored 3040 White, also use Hard Wax Oil Colored 3040 White as a second coat to prevent yellowing.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

The tried and trusted Osmo Polyx®-Oil in a fast drying version – for 2 coats within just one day! Clear, for the interiorHighly recommended for solid wood and plankwood flooring, blockstrip, OSB and cork flooringPolyx®-Oil Rapid enhances the tone of the wood, repels water and dirt, is resistant to abrasion and extremely hard-wearing.Number of coats: 2 coats on raw wood. For renovation, normally 1 thin coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 l  

Ideal for wooden flooring indoors, where increased slip resistance is required. Osmo Hard Wax Oil Anti-Slip is ideal for protecting all wooden floors and stairs where increased slip resistance is required (contract area), such as solid wood flooring, country house flooring, longstrip flooring, OSB and cork flooring.BENEFITS>  especially suitable for public objects>  scratch-resistant and hard-wearing>  suitable for children's toys (according to EN 71.3)>  wood-compatible and open-pore>  resistant to wine, cola, beer (according to DIN 68861-1A)>  to be partially repaired>  container sizes: 0.75 l; 2.5 l>  1 liter is enough for one coat for approx. 24 m2The Osmo hard wax oil anti-slip is a professional, colorless surface treatment according to DIN 18356 for all wooden floors (solid wood flooring, country house flooring, longstrip flooring and OSB).The easy-care paint is characterized by its special surface hardness and resistance to treading due to its special anti-slip properties.The material is available in two different settings:3088 hard wax oil anti-slip:The material is characterized by a velvety smooth, but non-slip surface. This hard wax oil can be used to achieve class R9 slip resistance.3089 Hard wax oil anti-slip EXTRA:This material is characterized by an extremely large surface. Special additives give the dried paint a structure that enables class 11 slip resistance.Both hard wax oils are water-repellent and dirt-resistant. Stains can be removed easily and without a trace. Reworking of individual heavily used or damaged areas by simply cleaning and painting over is possible without visible starting points. No full sanding and reworking of the entire surface.Osmo Hard Wax Oil Anti-Slip is based on natural vegetable oils and waxes. It is open-pored, does not tear, does not leaf and does not flake. That is why it is particularly well suited for use in damp rooms such as kitchens and bathrooms.The surface is resistant to wine, beer, cola, coffee, tea, fruit juice, milk, water according to DIN 68861-1A.Osrno hard wax oil anti-slip is extremely easy to apply. Two thin coats of approx. 35 g / m 'are sufficient (no primer, no intermediate sanding). It is of a creamy consistency (thixotropic) and therefore easy to apply. The grain of the natural product wood is emphasized.

Geared towards needs of extractive-rich hardwood species – for a low-maintenance surface!Clear, satin, for interior useHighly recommended for extractive-rich woods, such as Merbau, Wenge, Jatoba etc.Particularly deep-penetrating, retains the natural character of the wood. The surface is fully protected, becomes water-repellent and stays breathable.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 l1 litre covers approx. 24 m2 with 1 coat.

Intensive care product for wooden flooring treated with Hartwachs-Öl – ideal for commercial interiors! Pflege-Öl is for the general care and maintenance of oiled wooden flooring. Dull or matt surfaces can be freshened with Maintenance Oil. The timely use of Maintenance Oil can prevent time consuming sanding or renovation work.ADVANTAGES >  Ideal for commerical interiors>  Regular maintenance without sanding>  Fast drying>  An integrated component in Osmo wood care>  product range>  Can sizes: 1.00 L; 2.50 L>  1 litre covers approx. 40-60 m²APPLICATIONFinished surface in 1 day, 1 coatWith a Double Blade Scraper or Osmo Microfibre Roller, apply to the surface thinly.Buff into the surface with a single disc machine, e.g. Osmo FloorXcenter, and white pad (except for 3098). Remove excess.Drying time approx. 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Pflege-Öl can also be applied to smaller areas with a lint-free cloth.

Hard-wearing surface protection for wooden flooring and furniture! Hartwachs-Öl Express is a professional, fast drying finish for wooden flooring, furniture and other high traffic surfaces. Its unique oil-wax combination provides optimal surface protection.ADVANTAGES FOR PROFESSIONALS>  Fast drying>  Suitable for commercial interiors>  No primer, no sanding between coats>  Recoatable after approx. 4-5 hours>  Can sizes: 0.75 L; 2.50 L>  1 litre covers approx. 24 m²ADVANTAGES FOR YOUR CUSTOMERS>  Based on natural, vegetable oils and waxes>  Chemical resistance to water, red wine, cola according to German DIN 68861-1A>  Safe for humans, animals and plants when dry>  Easy cleaning and maintenanceAPPLICATIONFinished surface in 1 day, 2 coatsFirst coat on the raw, sanded wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 4 - 5 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a scouring pad before applying the second coat.Second coat approx. 35 ml/m².Drying time approx. 4 - 5 hours