OSMO Concrete Oil 610 Clear

Makes concrete surfaces and unglazed tiles more satin-resistant

Osmo Concrete oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.

ADVANTAGES
> Unique oil-wax combination
> Microporous surface
> Protection against dirt and wear
> Highly water repellent
> Resistant to wine, cola, beer (acc. DIN 68861-1A)
> Sizes: 0.75 l; 2.5 l
> 1 litre covers approx. 50 m2 with one coat.
Product coverage varies greatly depending on the absorption rates of the substrate and this can lead to discrepancies in coverage.

PROCESSING
Finished surface in 2 days, 2 coats
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well.
Remove excess with a pad or lint-free cloth
Drying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)
Drying time approx. 8-10 hours