WOOD FINISHES FOR THE EXTERIOR

Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.

The special protective wood impregnation against insect and fungal attack!Clear, for the exterior.Highly recommended for wood without structural loads or contact to the ground, e.g. windows, shutters, doors, pergolas, cladding and garden furniture.Osmo WR Base Coat is extremely water-repellent, reduces swelling and shrinkage, protects against wood pests, such as blue stain, rot and insect attack. Ideal is as a primer for all Osmo exterior oil-based finishes, all Osmo finishes are suitable as the required top coat!Number of coats: 1 coat is sufficient, a top coat is absolutely required.Can sizes: 0.75 l; 2.50 lApplication quantity: 160-200 ml/m2

Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.

Base and top coat combined into one – the innovative, long-term, oil-based wood protection! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony, screens, fences etc.Natural Oil Woodstain is water-repellent, weatherproof and UV-stable. The microporous surface contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 lNatural Oil Woodstain 701 Clear matt can be used to reduce the gloss level of Osmo satin wood finishes used on vertically installed exterior wood. When used as a self-priming finish, it offers no UV protection.Please note: the desired results of the colour tone may vary depending on the wood species.

Multitude of colours and unrivalled durability – for all weather conditions! Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces. ADVANTAGES> The wood structure remains visible> All colours can be mixed with each other> Country Colour is weather-resistant and robust against small damages> Resistant to saliva and perspiration, suitable for children's toys> Can sizes: 0.75 L; 2.50 L> 1 litre covers approx. 26 m2 with one coat. APPLICATIONFinished surface in 2 days, 2 coatsFirst coat on raw wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 10 - 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 35 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Extraordinarily versatile – for special applications on exterior wood!OSMO Clear Oil Wood Finish is an extraordinarily versatile wood finish with many possibilities for use on wood surfaces in outdoor areas. It is ideal as a base coat for softwood, in particular rough sawn wood or greyed and weathered wood surfaces, to balance out varying absorption rates of timber.ADVANTAGES For exterior use Versatile Strong water repellent and free of organic biocides Simple application Suitable for wood and microporous Resistant to saliva and perspiration, suitable for children's toys Can sizes: 0.75 l; 2.50 l 1 litre covers approx. 16 m2 with 1 coat.

Oil-based, anti-slip finish – added safety for your family! Clear, satin finish for the exteriorHighly recommended for wooden deckingAnti-Slip Decking Oil reduces the risk of slipping and extends the life of the pigmented base coat by providing extra protection against weathering. The surface is water-repellent, weatherproof and UV-stable. The finish is protected against mould, algae and fungal attack.Number of coats: One top coat on decking that has already been coated with one of the pigmented Osmo Decking-Oils. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 L; 2.50 L 

Osmo-grain wax protects your decking from cracking and minimize the swelling and shrinkage behavior. Grain-growth effect from the inside and prevent the bleeding of ingredients. The water-free, silicone-free grain-growth is easy to handle and has a high resistance to weathering.Coverage:375 ml sufficient for about 250 decking with bilateral treatment

Ideal for protecting against dirt from open-pored stone and terracotta surfaces.Osmo stone and terracotta oil is suitable for the colorless impregnation of open-pore natural stone with a polished, polished to rough-rough surface and concrete stones in the outdoor area. Particularly suitable for sidewalk slabs and window sills made of granite, limestone and slate.BENEFITS> Unique oil-wax combination> Open-pore surface> Protection against dirt and abrasion> resistant to wine, cola, beer (according to DIN 68861-1A)> Strongly water-repellent> Container sizes: 0.75 l; 2.5 l;> 1 liter is sufficient for one coat for approx. 32 m2. The range of the product depends very much on the absorbency of the surface and it can lead to significant deviations in the range.

Twice as much coverage thanks to high oil content – this saves time and money! Transparent, satin, for the exteriorHighly recommended for exterior timber cladding, balcony elements, roof soffits, summer houses, screens, fences etc.Osmo One Coat Only HS Plus smoothens the wood surface and does not crack, flake, peel or blister. The finish is durable, weatherproof and UV-stable, regulates moisture and reduces swelling and shrinkage.Number of coats: 1 coat is sufficient!Can sizes: 0.75 L; 2.50 LNote: Light, transparent colour tones only offer minimal UV protection and are therefore not recommended for surfaces exposed to strong sunlight.Please note: the desired results of the colour tone may vary depending on the wood species.

Ideal protection against dirt and stains!OSMO POLYMER COMPOSITE MAINTENANCE OIL 030 is a clear product suitable to maintain and restore weathered Wood Polymer Composites (WPC) and Bamboo Polymer Composites (BPC). Especially suited for decking, privacy screens and garden furniture made of WPC or BPC.ADVANTAGES>  Based on natural oils >  Microporous surface>  Stain protections and highly water repellent >  Safe for humans, animals and plants>  Can sizes: 0.75 l; 2.5 l>  1 litre covers approx. 40 m² with one coat.APPLICATIONBefore applying, clean the whole surface with water and Osmo WPC & BPC Reiniger and allow the surface to dry.Apply very thinly with Osmo Flat Brush or Osmo Decking Brush and spread well.Remove excess material with a clean and dry Decking Brush.Drying time approx. 8-10 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.

Extremely durable, opaque exterior finish! Öl-Farbe is best suited for all exterior wood for which an especially durable, biocidal and non-drip coating is desired: timber cladding, roof overhangs, gables, balconies, windows, window shutters, fencing, pergolas, wood shingles, garden sheds, carports and other dimensionally stable and instable constructional elements. Also ideal for renewing old microporous coatings and weathered wood surfaces.ADVANTAGES>  2 coats in one day>  Biocidal coating>  Non-drip and non-splatter>  Fast daying>  High solids content>  Minimizes the risk of visible knots >  1 litre covers approx. 20 m² with one coat.APPLICATIONFinished surface in 1 day, 2 coatsFirst coat on raw wood approx. 45 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 6-8 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 45 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Especially developed for windows and doors – extremely water-repellent, weatherproof and UV-stable!Opaque, satin, for the exterior.Highly recommended for windows and doors.Osmo Opaque Gloss Wood Stain is water-repellent, weatherproof and UV-stable. The finish is easy to apply and offers great coverage.Number of coats: Two coats on raw wood. For renovation generally one coat applied thinly to the clean and dry surface is sufficient - no sanding required!Can sizes: 0.75 L; 2.50 L1 litre covers approx. 20 m2, with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Top coat in a variety of colors - ideal for outdoor use OSMO GARDEN COLOUR is ideally suited for all types of wood outdoors: wooden facades, balconies, shutters, fences, pergolas, garden houses, garden furniture, carports. benefits> quick drying> Low in solvents> sprayable> water-based> suitable for children's toys (according to EN 71.3)> free of biocides> Container sizes: 0.75 l; 2.5 l> 1 liter is sufficient for approx. 16 m2 with one coat PROCESSINGFinished surface in 1 day, 2 coatsApply thinly and quickly in strips in the direction of the grain with Osmo flat brush or microfiber roller or apply by spraying.Let it dry for approx. 3-4 hours with good ventilation.After drying, apply the second coat thinly and quickly. A coat of paint is usually sufficient for renovations.

OSMO RAL Landhausfarbe is a better alternative to conventional, sealing paint coats.OSMO RAL Landhausfarbe provides colourful variety combined with the best protection. It is ideal for wooden facades, balconies, windows, garden and holiday homes as well as garden furniture.Special covering wood paint based on natural oil that bonds permanently with the wood. The silky matt surface covers the wood tone and grain, but allows the structure of the wood to be recognised.The paint penetrates deep into the fibres and allows the wood to breathe. It therefore remains permanently elastic, does not crack, flake or peel. In addition, OSMO RAL Country House Colour is robust against minor damage, durable and weather-resistant. Weathered glazes can simply be painted over without sanding and the structure of the wood is retained.OSMO RAL country house paints are mixed to order in the paint factory and can be delivered in approx. 15-30 working days. The minimum order quantity is only 1 x 2.5 litres per colour. Metallic, luminous and effect colours are not available. Please note that the mixed colours are approximate.1 litre is sufficient for approx. 16 m² with 2 coats.OSMO RAL Country House Colour is a custom-made product that cannot be returned.

Meets the needs of modern architecture – the innovative long-term protection in three attractive silver metallic colour tones! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony elements, screens and fences etc.Natural Oil Woodstain Effect is water-repellent and extremely weatherproof and UV-stable. The microporous surface also contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, generally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Extremely fast drying base coat!OSMO PRIMER is ideal as a base coat prior to installation, for example at the workshop. Vorstreichfarbe has been optimized for a professional and especially quick application. It has a non-drip formula and dries extremely fast. For a high-quality long-term protection, a top coat with Öl-Farbe White is recommended.ADVANTAGES >  Non-drip and non-splatter>  Extremely fast drying>  Biocidal coating>  Hides visible knots>  System integration with Osmo Öl-Farbe H-2101 White, Osmo Landhausfarbe 2101 White or Osmo Garten-& Fassadenfarbe 7262 Pure White / 7500 Traffic White>  1 litre covers approx. 12 m² with one coat.APPLICATIONFinished surface in 1 day, 1 coat (top coat required)Apply finish onto raw wood approx. 80 ml/m². Apply to all sides if possible.Drying time approx. 30 minutes, dry to sand and recoat after approx. 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Ventilate well while drying.Apply a top coat within 3 months with Öl-Farbe 2101.