The special protective wood impregnation against insect and fungal attack!Clear, for the exterior.Highly recommended for wood without structural loads or contact to the ground, e.g. windows, shutters, doors, pergolas, cladding and garden furniture.Osmo WR Base Coat is extremely water-repellent, reduces swelling and shrinkage, protects against wood pests, such as blue stain, rot and insect attack. Ideal is as a primer for all Osmo exterior oil-based finishes, all Osmo finishes are suitable as the required top coat!Number of coats: 1 coat is sufficient, a top coat is absolutely required.Can sizes: 0.75 l; 2.50 lApplication quantity: 160-200 ml/m2

Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.

Base and top coat combined into one – the innovative, long-term, oil-based wood protection! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony, screens, fences etc.Natural Oil Woodstain is water-repellent, weatherproof and UV-stable. The microporous surface contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 lNatural Oil Woodstain 701 Clear matt can be used to reduce the gloss level of Osmo satin wood finishes used on vertically installed exterior wood. When used as a self-priming finish, it offers no UV protection.Please note: the desired results of the colour tone may vary depending on the wood species.

Multitude of colours and unrivalled durability – for all weather conditions! Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces. ADVANTAGES> The wood structure remains visible> All colours can be mixed with each other> Country Colour is weather-resistant and robust against small damages> Resistant to saliva and perspiration, suitable for children's toys> Can sizes: 0.75 L; 2.50 L> 1 litre covers approx. 26 m2 with one coat. APPLICATIONFinished surface in 2 days, 2 coatsFirst coat on raw wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 10 - 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 35 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Extraordinarily versatile – for special applications on exterior wood!OSMO Clear Oil Wood Finish is an extraordinarily versatile wood finish with many possibilities for use on wood surfaces in outdoor areas. It is ideal as a base coat for softwood, in particular rough sawn wood or greyed and weathered wood surfaces, to balance out varying absorption rates of timber.ADVANTAGES For exterior use Versatile Strong water repellent and free of organic biocides Simple application Suitable for wood and microporous Resistant to saliva and perspiration, suitable for children's toys Can sizes: 0.75 l; 2.50 l 1 litre covers approx. 16 m2 with 1 coat.

Meets the needs of modern architecture – the innovative long-term protection in three attractive silver metallic colour tones! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony elements, screens and fences etc.Natural Oil Woodstain Effect is water-repellent and extremely weatherproof and UV-stable. The microporous surface also contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, generally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Twice as much coverage thanks to high oil content – this saves time and money! Transparent, satin, for the exteriorHighly recommended for exterior timber cladding, balcony elements, roof soffits, summer houses, screens, fences etc.Osmo One Coat Only HS Plus smoothens the wood surface and does not crack, flake, peel or blister. The finish is durable, weatherproof and UV-stable, regulates moisture and reduces swelling and shrinkage.Number of coats: 1 coat is sufficient!Can sizes: 0.75 L; 2.50 LNote: Light, transparent colour tones only offer minimal UV protection and are therefore not recommended for surfaces exposed to strong sunlight.Please note: the desired results of the colour tone may vary depending on the wood species.

Extremely durable, opaque exterior finish! Öl-Farbe is best suited for all exterior wood for which an especially durable, biocidal and non-drip coating is desired: timber cladding, roof overhangs, gables, balconies, windows, window shutters, fencing, pergolas, wood shingles, garden sheds, carports and other dimensionally stable and instable constructional elements. Also ideal for renewing old microporous coatings and weathered wood surfaces.ADVANTAGES>  2 coats in one day>  Biocidal coating>  Non-drip and non-splatter>  Fast daying>  High solids content>  Minimizes the risk of visible knots >  1 litre covers approx. 20 m² with one coat.APPLICATIONFinished surface in 1 day, 2 coatsFirst coat on raw wood approx. 45 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 6-8 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 45 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Especially developed for windows and doors – extremely water-repellent, weatherproof and UV-stable!Opaque, satin, for the exterior.Highly recommended for windows and doors.Osmo Opaque Gloss Wood Stain is water-repellent, weatherproof and UV-stable. The finish is easy to apply and offers great coverage.Number of coats: Two coats on raw wood. For renovation generally one coat applied thinly to the clean and dry surface is sufficient - no sanding required!Can sizes: 0.75 L; 2.50 L1 litre covers approx. 20 m2, with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Top coat in a variety of colors - ideal for outdoor use OSMO GARDEN COLOUR is ideally suited for all types of wood outdoors: wooden facades, balconies, shutters, fences, pergolas, garden houses, garden furniture, carports. benefits> quick drying> Low in solvents> sprayable> water-based> suitable for children's toys (according to EN 71.3)> free of biocides> Container sizes: 0.75 l; 2.5 l> 1 liter is sufficient for approx. 16 m2 with one coat PROCESSINGFinished surface in 1 day, 2 coatsApply thinly and quickly in strips in the direction of the grain with Osmo flat brush or microfiber roller or apply by spraying.Let it dry for approx. 3-4 hours with good ventilation.After drying, apply the second coat thinly and quickly. A coat of paint is usually sufficient for renovations.

Extremely fast drying base coat!OSMO PRIMER is ideal as a base coat prior to installation, for example at the workshop. Vorstreichfarbe has been optimized for a professional and especially quick application. It has a non-drip formula and dries extremely fast. For a high-quality long-term protection, a top coat with Öl-Farbe White is recommended.ADVANTAGES >  Non-drip and non-splatter>  Extremely fast drying>  Biocidal coating>  Hides visible knots>  System integration with Osmo Öl-Farbe H-2101 White, Osmo Landhausfarbe 2101 White or Osmo Garten-& Fassadenfarbe 7262 Pure White / 7500 Traffic White>  1 litre covers approx. 12 m² with one coat.APPLICATIONFinished surface in 1 day, 1 coat (top coat required)Apply finish onto raw wood approx. 80 ml/m². Apply to all sides if possible.Drying time approx. 30 minutes, dry to sand and recoat after approx. 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Ventilate well while drying.Apply a top coat within 3 months with Öl-Farbe 2101.

Osmo Garden Stain is a fast-drying, high-quality glaze for outdoor use that has been specially developed to protect wooden surfaces from the effects of the weather while maintaining a beautiful, natural appearance.Intended use: - Wooden facades, balconies, shutters, fences, pergolas, garden sheds, garden furniture, carports (except decking boards) - wherever wood is used outdoors, this glaze offers effective protection. - It is ideal for non-dimensionally stable and dimensionally stable wooden surfaces in outdoor areas that are exposed to all weather conditions.Properties: - Quick-drying: The stain is quickly absorbed into the wood and dries within a short time, which enables rapid processing and use. - Very long service life: Due to its special formulation, the stain offers long-lasting protection that protects the wood over a longer period of time and reduces the need for frequent re-treatment. - Weather-resistant: The glaze protects wood from harmful weather influences such as rain, sun, snow and cold without affecting the natural wood structure.- Breathable and open-pored: The wood can continue to “breathe”, which prevents the development of moisture damage such as mold or rot, while at the same time reducing the penetration of water from the air. - Aesthetic effect: The stain preserves the natural appearance of the wood and highlights the wood grain without covering the material.Application: 1. preparation of the surface: the wood surface must be clean, dry and free of dirt, dust and old coats of paint. If necessary, the wood can be sanded beforehand to achieve better adhesion. 2. application: Apply the stain evenly with a brush, an OSMO microfiber roller or a sprayer. Especially on vertical surfaces such as facades, the glaze should be applied in the direction of the wood grain. 3. drying time: The glaze should dry sufficiently between coats (approx. 3-4 hours, depending on temperature and humidity). 4. repetition: As a rule, two coats are sufficient to achieve optimum protection and an even appearance.YIELD: 1 liter is sufficient for approx. 16 m2 with 1 coat. Container sizes: 0.75 l, 2.50 lConclusion:Osmo Garden Stain offers an excellent long-term solution for the protection of exterior wood. It combines fast drying, long durability and high weather protection, while at the same time preserving the natural beauty of the wood. It is suitable for a wide range of wooden surfaces, from facades to garden furniture, and is an ideal choice when it comes to maintaining and protecting exterior wood.

Osmo Graying Stain is an oil-based, matt glaze for exterior use that has been specially developed to give wood a natural, gray patina. It provides long-term protection while giving the wood an aesthetic, silver-grey hue typical of naturally aged wood.Intended use:- Ideal for all types of exterior wood such as doors, windows, shutters (dimensionally stable components), carports, wooden facades, balconies, wooden terraces, fences, pergolas and garden sheds. - The stain gives the wood a natural, silver-grey patina that mimics the typical appearance of weathered wood outdoors.Properties: - Oil-based formulation: the glaze is based on a high-quality oil technology that deeply protects the wood while emphasizing the natural structure and grain of the wood. - Matt surface: The matt appearance provides an authentic, weathered wood surface that exudes a natural charm. - Pre-graying: The glaze creates a premature graying effect that allows the wood to have an aged look right from the start - ideal if you want the weathered charm of wood immediately. - Long-term protection: It offers long-term protection against the weather and prevents the formation of algae, fungi and other types of mold. This means the wood remains protected in the long term and retains its beautiful appearance. - Water-repellent and breathable: The glaze protects the wood from moisture, but at the same time allows it to “breathe”, preventing moisture from accumulating in the wood. - Easy to apply: The glaze is easy to apply and absorbs quickly without obscuring the natural wood structure.Application: 1. preparation of the surface: the wood surface should be clean, dry and free of dust, dirt and old coats of paint. If necessary, the wood should be sanded to ensure better adhesion. 2. application: Osmo Graying Stain is applied evenly with a brush, roller brush or sprayer. It is recommended to treat the wood in the direction of the grain.3. allow to dry: The glaze dries relatively quickly, but approx. 4-6 hours drying time should be allowed between coats. For a more intensive result, a second or even third coat can be applied.4. maintenance: After application, the wood can be maintained regularly depending on the weather conditions in order to maintain the graying. Container sizes: 0.75 l, 2.50 lThe range of the product is 26 m²/1 l with 1 coat.Conclusion: Osmo Graying Stain is an excellent choice for anyone who wants to achieve the natural, silver-grey look of weathered wood for their exterior surfaces without sacrificing protection and durability. With its oily matt finish and long-lasting protective effect, the glaze is perfect for wooden facades, balconies, fences and many other outdoor wooden surfaces. It not only protects the wood from the elements, but also gives it an attractive, gray patina.