Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.

Perfect for refreshing and cleaning greyed wooden surfaces.Special liquid cleaner, for exterior useEspecially recommended for wooden decking, timber cladding and similar surfacesRemoves grayed wood cells, the wood regains its natural character and almost its original colour.The product is free from odour and biodegradableUse: Depending on the level of greying, either pure or thinned with water. Leave for 15 minutes, remove using a hard bristle brush (deck scrubber) and lots of water. After thorough drying a coat of one of the Osmo Wood Oils is recommendedAvailable in 0.5 and 2.5 litre cans with deck scrubber1 litre covers approx. 10-30 m² (depending on level of greying and soiling)

Highly effective concentrate for cleaning untreated or oiled wooden decking.Suitable for cleaning of all wood flooring in outdoors as well as screens, fences and wooden garden furniture.Osmo Decking Cleaner is a highly effective concentrate for cleaning decking of untreated or oiled wood.Application: Remove dirt with a solid broom/hand brush from the surface. Mix Osmo Decking Cleaner with water (the amount depends on the degree of soiling, from mix ratio 1:25 to max. 1:1). Then clean the wood along the wood grain with a scrubber. For mechanical cleaning on decking, the Osmo decking cleaning machine is recommended. After cleaning, rinse with clear water.Available in: 1, 5 litre drums1 litre covers approx. 30 - 100 m2

Effective cleaner for WPC / BPC decking and all other wood-plastic-composites.Highly effective, slightly alkaline special cleaner for removing organic and inorganic contaminants in the exterior.Ideal for intensive cleaning of WPC / BPC decking and all other wood-plastic composites (e.g. garden furniture, fencing) in the exterior.Application: Dilute concentrate in mix ratio 1:10 to 1:20 with water. Apply on the contaminanted surfaces, remove the dirt with a scrubbing brush and then rinse with clear water. Test the surface on compatibility in each case!Available in 1, 5 and 10 litre.1 Litre covers approx. 10 - 50 m2

Ideal for protecting against dirt from open-pored stone and terracotta surfaces.Osmo stone and terracotta oil is suitable for the colorless impregnation of open-pore natural stone with a polished, polished to rough-rough surface and concrete stones in the outdoor area. Particularly suitable for sidewalk slabs and window sills made of granite, limestone and slate.BENEFITS> Unique oil-wax combination> Open-pore surface> Protection against dirt and abrasion> resistant to wine, cola, beer (according to DIN 68861-1A)> Strongly water-repellent> Container sizes: 0.75 l; 2.5 l;> 1 liter is sufficient for one coat for approx. 32 m2. The range of the product depends very much on the absorbency of the surface and it can lead to significant deviations in the range.

Ideal protection against dirt and stains!OSMO POLYMER COMPOSITE MAINTENANCE OIL 030 is a clear product suitable to maintain and restore weathered Wood Polymer Composites (WPC) and Bamboo Polymer Composites (BPC). Especially suited for decking, privacy screens and garden furniture made of WPC or BPC.ADVANTAGES>  Based on natural oils >  Microporous surface>  Stain protections and highly water repellent >  Safe for humans, animals and plants>  Can sizes: 0.75 l; 2.5 l>  1 litre covers approx. 40 m² with one coat.APPLICATIONBefore applying, clean the whole surface with water and Osmo WPC & BPC Reiniger and allow the surface to dry.Apply very thinly with Osmo Flat Brush or Osmo Decking Brush and spread well.Remove excess material with a clean and dry Decking Brush.Drying time approx. 8-10 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.

Removes old Decking-Oils and wood stains uniformly and effectively PRODUCT DESCRIPTION
Ready-to-use, viscous paint remover especially developed for removing old existing oil surface finishes in outdoor areas. Afterwards the surface can be degreyed with Osmo Wood Reviver Power-Gel and then re-oiled.RECOMMENDED USE
Osmo Paint Remover Gel removes old Decking-Oils and wood stains on timber decking and garden furniture made of wood. Ideal for removing oil-based surface finishes on partially weathered timber decking so that an overall oil-free wood surface is achieved.INGREDIENTS
Osmo Paint Remover Gel contains Aqua, Xanthan Gum, Sodium Hydroxide, Potassium Hydroxide. Detailed declaration of ingredients available upon request. TECHNICAL DATA
Specific weight: (density): 1.05 g/cm3 +/- 0.05 g/cm3 pH value: 11.0-11.5STORAGE
Up to 2 years and longer if kept dry, closed tightly and stored in the original container. Do not expose to frost or temperatures over 30 °C!SURFACE PREPARATION
Before the application, remove any debris from the surface with a broom or hand broom.
Cover all areas that should not be treated.
Osmo Paint Remover Gel is ready to use. Do not thin. Stir well before and during use as some separation in product may occur after some time.
Before treatment with Osmo Paint Remover Gel, test the subsurface. A trial application is absolutely.APPLICATION necessary! Suitability, reaction time and required application amount can be determined on representative trial area. Caution should be taken when used on veneers! Veneers may loosen from substrate.METHODS OF APPLICATION
With a brush or Osmo Decking Cleaning Brush, apply product thick enough (approx. 200 ml/m2) on the dry surface to be cleaned, and allow to react for 60 minutes (but not longer than needed!).
Keep surface damp during reaction time (e.g. with a spray bottle). Afterwards scrub the surface with a lot of clear water along the wood grain. After drying, inspect the wood surface and repeat the process if necessary. Residues from Paint Remover Gel can have a negative influence on the drying and adhesive properties of subsequent coatings.
Therefore, it is absolutely essential to thoroughly rinse the surface after treatment. If the wood surface should be re-oiled, the surface must be neutralized and degreyed with Osmo Wood Reviver Power-Gel after drying.CLEANING OF TOOLS
Immediately after use, with soap and water.DRYING TIME
Allow to dry for at least 48 hours (normal climatic conditions, 23 °C/50 % rel. humidity) before applying a new surface finish. Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.COVERAGE
1 litre covers approx. 5 m2 with one application.NOTE
Cover all areas that should not be treated, such as sensitive plants, porous substrates (e.g. lightly coloured pebble dashed concrete, render etc.), aluminium, zinc or lacquered surfaces. Have mop water ready to rinse any surfaces (e.g. aluminium, zinc or lacquered areas) that have accidentally come into contact with the gel. Please wear safety gloves and goggles.

Maintenance spray especially for garden furniture and wood decks.Water-resistant and abrasion resistant. Semi-gloss, porous.No UV protection.

Special complete maintenance kit for finishing teak and hardwood furniture.Freshens and cleans dirty and weathered wood, for exterior useEspecially recommended for garden furnitureSet contains: Wood Reviver - refreshes and cleans greyed wood; Teak Oil Spray - protects, maintains and improves the appearance of garden furniture and deckings (water-repellent, dirt-resistant oil); buffing fleece and a stiff brush