TOPOIL SURFACE KIT

Product information "TOPOIL SURFACE KIT"

One set for all eventualities – fully equipped for the treatment of worktops and furniture made of wood.

Initial care, maintenance and refreshing in one set:

  • TopOil clear matt 500 ml
  • Spray Cleaner 500 ml
  • Hand Pad Holder
  • Oil Finish Applicator Fleece
  • Buffing fleece
  • Care instructions
YouTube Video "TOPOIL SURFACE KIT"
Info PDF "TOPOIL SURFACE KIT"
Downloads "TOPOIL SURFACE KIT"

Accessories

OSMO Spray Cleaner 8026 0.5 l
Ready-to-use spray solution for daily cleaning and maintenance – especially developed for surfaces oiled and waxed wood surfaces, e.g. Osmo TopOil. It contains soaps based on natural oils. Cleans the surface without removing oils and waxes. Spray Cleaner does not dry wood out. Especially mild on skin, free of dyes and fragrances, biodegradable, free of solvents and emissions.RECOMMENDED USE
Osmo Spray Cleaner is especially suitable for cleaning and maintaining oiled and waxed interior wood surfaces. It is particularly recommended for surfaces treated with Osmo TopOil.INGREDIENTS
<5% vegetable soaps (anionic surfactants), nonionic surfactants; in-can preservation: active ingredients: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE (C(M)IT/MIT (3:1))
 TECHNICAL DATA
Specific gravity: 1.01-1.03 g/cm3 Odour: faint/mild, after drying odourless pH value at 20°C: 10.9STORAGE
Up to 2 years and longer if container is kept dry, closed tightly and stored at temperatures between 5 and 35°C. Do not expose to frost during transport!SURFACE PREPARATION Remove loose dirt. Osmo Spray Cleaner is ready to use. Please do not thin.METHODS OF APPLICATION
Turn the spray nozzle to open and spray Osmo Spray Cleaner directly onto the surface. Afterwards rub with lint-free cotton cloth.COVERAGE
Product coverage depends heavily on the amount of dirt and stains.NOTE
Only apply damply in order to avoid damages.

Content: 0.5 liter (€33.60* / 1 liter)

€16.80*
OSMO Oil Finish Application Fleece
For the simple and optimal application of all oil finishes on smooth subsurfaces.

From €7.98*
OSMO HAND PAD HOLDER 85x135 mm
Ideal for a precise application in smaller areas!Hand Pad Holder 85 x 135 mm, for Superpads 95 x 155 mm    •    Suitable for the application of base coats on wooden flooring and the intensive cleaning of wooden flooring and timber decking.    •    With Osmo Oil Finish Applicator Fleece, ideal for the application of Osmo Polyx®-Oils and Osmo TopOil.    •    Superpads in white, red and green and Osmo Oil Finish Applicator Fleece are available as accessories

€9.96*
Tip
OSMO TopOil 0.5l
Oil-wax coating – created specifically for use on wooden furniture and (kitchen) work surfaces!  Clear or transparent, satin or matt, for the interiorHighly recommend for furniture and (kitchen) work surfaces made of woodTopOil makes the wooden surface resistant to common household chemicals and stains and abrasion and repels water. It is saliva-resistant and sweatproof, food-safe as well as suitable for children's toys.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no need for sanding!Can sizes: 0.5 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.5 liter (€59.88* / 1 liter)

From €29.94*

Similar Items

OSMO stairs care box
The Osmo stairs care box is ideal for cleaning and refreshing as well as maintaining wooden stairs treated with Osmo Hartwachs-Öl.SET CONTENTS>  Wash and Care cleaning concentrate 250 ml>  Maintenance Oil clear 200 ml>  Easy Pads 2 pcs.>  Polishing pad>  Gloves 1 pair>  Care instructionsPlease follow the work instructions for each individual product.

€49.98*
Tip
OSMO Hardwax-Oil Effekt Natural 3041
Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.75 liter (€55.92* / 1 liter)

From €41.94*
Tip
OSMO Hardwax-Oil Original
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Content: 0.375 liter (€79.84* / 1 liter)

From €29.94*

Accessory Items

OSMO Spray Cleaner 8026 0.5 l
Ready-to-use spray solution for daily cleaning and maintenance – especially developed for surfaces oiled and waxed wood surfaces, e.g. Osmo TopOil. It contains soaps based on natural oils. Cleans the surface without removing oils and waxes. Spray Cleaner does not dry wood out. Especially mild on skin, free of dyes and fragrances, biodegradable, free of solvents and emissions.RECOMMENDED USE
Osmo Spray Cleaner is especially suitable for cleaning and maintaining oiled and waxed interior wood surfaces. It is particularly recommended for surfaces treated with Osmo TopOil.INGREDIENTS
<5% vegetable soaps (anionic surfactants), nonionic surfactants; in-can preservation: active ingredients: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE (C(M)IT/MIT (3:1))
 TECHNICAL DATA
Specific gravity: 1.01-1.03 g/cm3 Odour: faint/mild, after drying odourless pH value at 20°C: 10.9STORAGE
Up to 2 years and longer if container is kept dry, closed tightly and stored at temperatures between 5 and 35°C. Do not expose to frost during transport!SURFACE PREPARATION Remove loose dirt. Osmo Spray Cleaner is ready to use. Please do not thin.METHODS OF APPLICATION
Turn the spray nozzle to open and spray Osmo Spray Cleaner directly onto the surface. Afterwards rub with lint-free cotton cloth.COVERAGE
Product coverage depends heavily on the amount of dirt and stains.NOTE
Only apply damply in order to avoid damages.

Content: 0.5 liter (€33.60* / 1 liter)

€16.80*
OSMO Oil Finish Application Fleece
For the simple and optimal application of all oil finishes on smooth subsurfaces.

From €7.98*
OSMO HAND PAD HOLDER 85x135 mm
Ideal for a precise application in smaller areas!Hand Pad Holder 85 x 135 mm, for Superpads 95 x 155 mm    •    Suitable for the application of base coats on wooden flooring and the intensive cleaning of wooden flooring and timber decking.    •    With Osmo Oil Finish Applicator Fleece, ideal for the application of Osmo Polyx®-Oils and Osmo TopOil.    •    Superpads in white, red and green and Osmo Oil Finish Applicator Fleece are available as accessories

€9.96*
Tip
OSMO TopOil 0.5l
Oil-wax coating – created specifically for use on wooden furniture and (kitchen) work surfaces!  Clear or transparent, satin or matt, for the interiorHighly recommend for furniture and (kitchen) work surfaces made of woodTopOil makes the wooden surface resistant to common household chemicals and stains and abrasion and repels water. It is saliva-resistant and sweatproof, food-safe as well as suitable for children's toys.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no need for sanding!Can sizes: 0.5 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.5 liter (€59.88* / 1 liter)

From €29.94*

Similar Items

OSMO stairs care box
The Osmo stairs care box is ideal for cleaning and refreshing as well as maintaining wooden stairs treated with Osmo Hartwachs-Öl.SET CONTENTS>  Wash and Care cleaning concentrate 250 ml>  Maintenance Oil clear 200 ml>  Easy Pads 2 pcs.>  Polishing pad>  Gloves 1 pair>  Care instructionsPlease follow the work instructions for each individual product.

€49.98*
Tip
OSMO Hardwax-Oil Effekt Natural 3041
Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Content: 0.75 liter (€55.92* / 1 liter)

From €41.94*
Tip
OSMO Hardwax-Oil Original
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Content: 0.375 liter (€79.84* / 1 liter)

From €29.94*