Unique UV protection - ideal for the initial treatment of solid wood wall and ceiling panelling!
Clear or transparent, satin, for the interior Highly recommended as a self-priming finish for wall and ceiling panelling, as well as cabinets and doors Uviwax® UV-Protection significantly reduces the natural yellowing process, and the bright, natural colour of the wood is preserved for a long time. Number of coats: 2 coats on the raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient. Can sizes: 0.75 l; 2.50 l Please note: the desired results of the colour tone may vary depending on the wood species.
The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.
Optimally equipped for any painting projectFor the optimal application of all oil based wood finishes • Ideal for treating larger areas made of rough sawn, untreated or planed wood. • Ergonomically shaped for fatigue-free work • Optimal product absorption and and even distribution provide very good finishing results. • Contents: roller tray with ridged area, disposable tray inserts (3 pieces), Microfibre Roller (100 mm wide) and roller frame and Flat Brush (60 mm) • Suitable for Osmo System Telescopic Handle
The tried and trusted Polyx®-Oil in a coloured version – tinted for individual creativity! Transparent, satin, for the interiorHighly recommended for solid wood, plankwood, OSB and cork flooring and blockstrip as well as furniture and edge-glued panelsPolyx®-Oil Tints creates a transparent coloured wood surface.Number of coats: for untreated wood max. 2 coats. For floors, max. one coat with Polyx®-Oil Tints and carry out a second coat with a clear Osmo Polyx®-Oil.With Hard Wax Oil Colored 3040 White, also use Hard Wax Oil Colored 3040 White as a second coat to prevent yellowing.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.
Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money. Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC. STORABILITY 5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content). Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly. Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste). Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling. The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly. Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly. When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.
Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.75 l; 2.50 l* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.
The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.
Optimally equipped for any painting projectFor the optimal application of all oil based wood finishes • Ideal for treating larger areas made of rough sawn, untreated or planed wood. • Ergonomically shaped for fatigue-free work • Optimal product absorption and and even distribution provide very good finishing results. • Contents: roller tray with ridged area, disposable tray inserts (3 pieces), Microfibre Roller (100 mm wide) and roller frame and Flat Brush (60 mm) • Suitable for Osmo System Telescopic Handle
The tried and trusted Polyx®-Oil in a coloured version – tinted for individual creativity! Transparent, satin, for the interiorHighly recommended for solid wood, plankwood, OSB and cork flooring and blockstrip as well as furniture and edge-glued panelsPolyx®-Oil Tints creates a transparent coloured wood surface.Number of coats: for untreated wood max. 2 coats. For floors, max. one coat with Polyx®-Oil Tints and carry out a second coat with a clear Osmo Polyx®-Oil.With Hard Wax Oil Colored 3040 White, also use Hard Wax Oil Colored 3040 White as a second coat to prevent yellowing.Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.
Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money. Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC. STORABILITY 5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content). Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly. Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste). Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling. The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly. Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly. When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.
Transparent and intensively coloured designs – the all-round talent for interior wood! Transparent or intensive, satin or matt, for the interiorHighly recommended for furniture and children's toys, flooring*, walls, ceilings, doors, mouldings, beams and edge-glued panelsWood Wax Finish results in a water and dirt-resistant surface. It is wipe-proof and stain-resistant.As colouring primer for wooden flooring, apply only one coat. Once completely dried, apply the top coat with clear Polyx®-Oil Original.All Wood Wax Finishes can be mixed with each other or with the clear Polyx®-Oil Original.Use directly or as the basis for creative colour tones.Number of coats: for a transparent finish, one coat, for an intenstively coloured surface, apply two coats.Can sizes: 0.75 l; 2.50 l* for flooring, a top coat with Polyx®-Oil is recommended.Please note: the desired results of the colour tone may vary depending on the wood species.