OSMO ONE COAT ONLY HSPLUS

Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.

Base and top coat combined into one – the innovative, long-term, oil-based wood protection! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony, screens, fences etc.Natural Oil Woodstain is water-repellent, weatherproof and UV-stable. The microporous surface contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 lNatural Oil Woodstain 701 Clear matt can be used to reduce the gloss level of Osmo satin wood finishes used on vertically installed exterior wood. When used as a self-priming finish, it offers no UV protection.Please note: the desired results of the colour tone may vary depending on the wood species.

The special protective wood impregnation against insect and fungal attack!Clear, for the exterior.Highly recommended for wood without structural loads or contact to the ground, e.g. windows, shutters, doors, pergolas, cladding and garden furniture.Osmo WR Base Coat is extremely water-repellent, reduces swelling and shrinkage, protects against wood pests, such as blue stain, rot and insect attack. Ideal is as a primer for all Osmo exterior oil-based finishes, all Osmo finishes are suitable as the required top coat!Number of coats: 1 coat is sufficient, a top coat is absolutely required.Can sizes: 0.75 l; 2.50 lApplication quantity: 160-200 ml/m2

Multitude of colours and unrivalled durability – for all weather conditions! Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces. ADVANTAGES> The wood structure remains visible> All colours can be mixed with each other> Country Colour is weather-resistant and robust against small damages> Resistant to saliva and perspiration, suitable for children's toys> Can sizes: 0.75 L; 2.50 L> 1 litre covers approx. 26 m2 with one coat. APPLICATIONFinished surface in 2 days, 2 coatsFirst coat on raw wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 10 - 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 35 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Meets the needs of modern architecture – the innovative long-term protection in three attractive silver metallic colour tones! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony elements, screens and fences etc.Natural Oil Woodstain Effect is water-repellent and extremely weatherproof and UV-stable. The microporous surface also contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, generally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.