OSMO Spring Spatula 270 mm

For filling small joints!OSMO WOOD PUTTY is a clear polymer dispersion for filling cracks and joints in sanded wooden flooring or parquet. Extremely high filling strength, short drying times and good sanding properties create a quality product. Fugenkittlösung is combined with sanding dust, and thus it offers a big advantage in that it matches the colour of subsurface exactly.ADVANTAGES >  High filling power>  Quick drying>  Good sanding properties>  Low odour>  Sizes: 1.00 L; 5.00 L>  1 litre covers approx. 10-15 m².APPLICATIONBefore applying, stir well in a bucket so that any settlement is mixed in.Mix in sanding dust, best from the same type of wood with a grit 80-120, into thick paste (approx. 15 % weight increase by adding sanding dust).Fill in flooring diagonally with a stainless steel double blade scraper and at the same time press wood putty firmly into joints. Repeat process if necessary.After 30 – 60 minutes the dried paste can be sanded coarsely (grit P80) and afterwards finely sanded (grit P100 – 120) so that no wood putty is left on the surface of the parquet. In most cases, fine sanding with P100 – 120 is enough.Treatment with any oil-and-wax-based wood finish from Osmo can be carried out afterwards.Note: As wood putty mixture and application strongly depends on wood species and sanding dust, a trial application is absolutely necessary! Do not fill joints in sprung or plank flooring!