Osmo HandXcenter

Osmo LED Smart-Oil is a professional, matt oil finish that cures in a matter of seconds using LED spotlights, offering significant time savings compared with conventional products. Important instructions for use and details:Curing: The oil does not cure through oxidation in the air, but must be exposed to a suitable LED lamp (wavelength 395 nm, at least 8 watts). Without this, complete curing will not take place.Application: When applying the oil, be sure to avoid direct sunlight or bright light containing UV rays, as this can cause unwanted pre-curing. Application under artificial light is recommended.Application: Only one coat is required for a matt finish. For a silk-matt sheen, a second, very thin coat (approx. 5–10 g/m²) can be applied after the first coat has been lightly sanded.Coverage: One litre covers approx. 40–50 m² per coat.Colours: The oil is available in 12 modern shades as well as colourless matt.VOC content: The product is low in VOCs and solvent-free (max. 10 g/l VOC). Suitability and Certificates:This finish is suitable for all wooden floors, stairs and furniture, particularly for woods with high natural oil content and in high-traffic areas. It is resistant to liquids such as wine, beer, cola and coffee (in accordance with DIN EN 12720) and, once dry, meets the following safety standards: Certificate / Standard MeaningDIN EN 71-3 Suitable for children’s toys (safety in the event of ingestion of toy materials)DIN EN 1186-3 Food-safe (safe for contact with food)DIN 53160 Saliva- and sweat-resistant An important note: According to the manufacturer, Osmo LED Smart-Oil is intended exclusively for professional and industrial use.

INSTANT LED-UV CURING FOR OSMO LED SMART-OIL WOOD FINISHThe Osmo UV LED Smartlight Pro LUVB-20015 lamp is the central component of the Osmo LED Smart-Oil hard wax system for indoor use and provides the specialised UV LED light required to cure the wood surface treatment in a matter of seconds!The set includes the following items:1 x UV LED Smartlight Pro for curing the Smart-Oil1 x tin of LED Smart-Oil Colourless Matt, 0.75 litres1 x HandXcenter1 x colour chart, 240 x 100 mm4 x mini tins of LED Smart-Oil, 0.125 litres: White, Natural, Antique Oak, Charcoal1 x squeegee with rubber lip, 220 mm5 x white pads for HandXcenter1 x hand pad holder2 x white Superpads

INSTANT LED-UV CURING FOR OSMO LED SMART-OIL WOOD FINISHOsmo UV LED Smartlight Pro LUVB-20015 Lamp is the key component for the Osmo LED Smart-Oil interior hardwax system, delivering the specialised UV LED light required to cure the wood finish in seconds!Dries LED Smart-Oil instantly under 395nm LED-UV lampDelivers the correct wavelength and intensity for reliable curingHelps achieve a fully cured finish in secondsReduces project turnaround times by eliminating lengthy drying and curing periodsFully portable and suitable for workshop and on-site useComes complete with protective case that also contains power cable, and two pairs of protective eye glasses (with cleaning cloths)Professional-grade construction

Main Uses of the White PadsFor Maintenance: For evenly polishing maintenance oil or TopOil onto oiled surfaces such as furniture or countertops. For Coloring: For evenly applying and polishing colored oils, such as oil-based stains, decorative wax, or colored hard wax oil. 💡 Important handling tips: Product amount: If streaks form on the wood, you have used too much product. Simply flip the pad over or let it dry on untreated wood. Storage: Never set the machine down on the pad after use. The weight on one side compresses the pad, which impairs subsequent operation and may require replacement.

The Osmo Drive Plate (Velcro Plate) for the HandXcenter is the key replacement part that holds the white pad attachment onto the machine. Here is the most important information about it: Function: The drive plate has a Velcro surface. The white application pad (working width 218 mm) is attached to this surface to work oils and care products evenly into the wood using the machine’s oscillating motion. Technical Specifications: The plate itself has a diameter of 240 mm. Replacement Criteria: The machine should only be operated with a drive plate in perfect condition. You must replace the drive plate if the Velcro surface is worn smooth, damaged, or heavily discolored to ensure optimal performance.